Skip to content

Candidates & Interviews

This page explains how to review applicants, move them through your hiring steps, message them, organise them in shortlists and talent pools, schedule interviews, use interview kits and scorecards, and send assessments.


Your Pipeline

Open a job from Jobs and select the Candidates tab. You can see the job's candidates in two ways:

  • List: a table of every candidate, which you can search, filter and select in bulk.
  • Board by step: a column for each hiring step, with a card for each candidate.

The job's Overview tab also shows Where candidates are: how many people are at each step. Candidates who have waited longer than the step's time limit show how many days they've been in that step.

Opening a Candidate

Select a candidate to open their record. At the top you'll find:

Button What it does
Interview Schedule an interview with this candidate.
Assessment Send them a skills test or questionnaire.
Email Write them an email.
More Edit candidate details, Add to a talent pool, Add to another job, Download all files and, if your role allows it, Delete candidate.
Reject Reject the candidate (see Rejecting a Candidate).

Below that, the Overview, Assessments, Video interview and Decision tabs show the candidate's CV and files, their answers, other jobs they applied for, their tests, any recorded answers, and your hiring decision. Use Your rating to give them stars, add tags under their name, and leave Team notes for colleagues.

Use Prev and Next to move between candidates without closing the record.


Moving Candidates Through the Steps

You can move a candidate in several ways:

  • On the board: drag their card to another step's column.
  • On the card: select the arrow to move them to the next step.
  • On their record: under What's Next, select Move to Next Stage, or choose a step from Move to a different stage....
  • In bulk: in the List, tick several candidates, select Move Stage, then choose the step.

If the new step has a candidate action set to send automatically (for example a skills test or a document request), Shuma sends it as soon as the candidate arrives. You can see and manage it on the candidate's record under Candidate steps:

  • Send current step sends the current step's action now.
  • Re-send link sends the candidate their link again.
  • Extend 3 days gives them more time.
  • Skip marks the action as not needed.

Bulk Actions

In the List, tick the candidates you want, then choose Move Stage, Email, Export CSV, Tag, Add to pool or Reject. Select Clear to clear your selection.

Rejecting a Candidate

  1. Select Reject on the candidate's card or record (or in bulk).
  2. Choose a Reason. Admins set up the list of reasons in Settings › Rejection reasons.
  3. Optionally add Internal notes (not shared with the candidate).
  4. To tell the candidate, tick Email the candidate that they were not selected, then choose The standard email or Write your own message.
  5. Select Reject.

Messages and Communications

Emailing Candidates

  • One candidate: open their record and select Email.
  • Several candidates: tick them in the List and select Email.

Templates and Automatic Emails

Go to Library › Email and SMS templates.

  • The Sent Messages tab is a log of everything sent to candidates.
  • The Templates tab holds your own templates (New email) and the Standard emails Shuma sends automatically, such as the confirmation when someone applies. Select Customise to use your own wording for a standard email.
  • Select Compose to write a one-off message.

When you create or edit a template:

  1. Enter a Name and choose When is it sent?: Only when someone chooses it, or Automatically, when a candidate reaches a stage (then choose the stage).
  2. Write the Subject and Message. Use Insert field to add details such as the candidate's first name or the job title, which Shuma fills in for each candidate.
  3. Use Send me a test to see how it looks in your inbox.
  4. Select Save template.

Every email shows your organisation's name and says it was sent with Shuma.

Optional feature: text messages

If your organisation has SMS and WhatsApp updates switched on, candidates can choose to get their next steps and interview reminders by text message as well as email. Use New text message on the Templates tab to write your own text message templates.


Shortlists

Use a shortlist to gather hand-picked candidates, for example to compare them side by side before a decision.

  1. Go to Library › Shortlists and select New Shortlist.
  2. Enter a Name and Description, then select Create.
  3. Open the shortlist and select Add candidates. Find each person and select + Add.

To take someone off a shortlist, select Remove. You can also rename or delete a shortlist.


Talent Pools

A talent pool is a group of promising people you want to come back to when a new role opens.

  1. Go to Library › Talent pools and select Create pool.
  2. Enter a Pool Name and Description, then select Create.
  3. Add people:
    • from a candidate's record: More › Add to a talent pool, or
    • in bulk from a job's List: tick candidates and select Add to pool.

The Consent column shows whether each person Agreed to be kept on file for other roles when they applied, or whether consent is Not given. To bring people into a new role, select Invite or add to a job.

Respect candidates' choices

Candidates choose whether you may keep their details for other roles when they apply. Only invite people who have agreed, and follow your organisation's privacy policy.


Scheduling Interviews

You can schedule an interview from:

  • a job's Interviews tab: Schedule an interview,
  • a candidate's record: Interview, or
  • My schedule: Schedule interview.

  • Choose the Candidate (if it isn't already filled in).

  • Under What kind of interview?, choose Video call, Phone, In person or Panel.
  • Enter a Title, the Date, Start time, Length and Time zone.
  • Add the Interviewers. Shuma checks their calendars and shows Everyone is free then or Clashes at this time.
  • Optionally add a Note for the candidate, for example what to bring.
  • Select Schedule interview.

The candidate gets an email with the details, and they can add the interview to their own calendar.

After the Interview

On the job's Interviews tab, past interviews still marked as scheduled appear under Did these happen? Select It happened, Candidate didn't come or Reschedule. To move an upcoming interview, select Reschedule; the candidate and the panel are told about the new time.

Letting Candidates Book Their Own Interview

Give a hiring step the Interview booking candidate action (see What Happens at Each Step). Candidates then choose a time from the interviewers' available hours.

Each interviewer sets their hours in My schedule › My availability:

  • Under Weekly hours, set the hours you can interview, then Save hours.
  • Under Time off, add the days you're away with Add time off.
  • If your organisation offers it, select Connect Outlook calendar or Connect Google calendar, so candidates aren't offered times when you're already busy and interviews are added to your calendar. Only busy times are read.

My Schedule

My schedule shows interviews across all your jobs. Choose Week for a calendar view or All interviews for a list, which you can filter by Upcoming, Needs outcome, Completed or Cancelled.

Optional feature: live video interviews

If your organisation has Live video interviews switched on, video and panel interviews run in Shuma's built-in video room. Select Join video room when it's time (or Open early to get ready). The candidate waits in a lobby until you select Let in. Otherwise, add your usual meeting link in the Meeting Link field when you schedule from My schedule › Schedule interview.

Optional feature: group sessions

If your organisation has Group sessions switched on, you can run group interviews and information sessions for hiring many people at once. Select Set up a group session on the job's Interviews tab. Candidates book a seat from their personal link, with a waiting list when a session is full.


Interview Kits and Scorecards

Interview Kits

An interview kit gives every interviewer the same questions and scoring guide, so scores can be compared fairly.

  1. Go to Library › Interview kits (or My schedule › Interview kits) and select New kit.
  2. Enter a Name and a Briefing for interviewers.
  3. Under Rubric, select + Add criterion for each thing you'll score (for example "Customer focus").
  4. Under Questions, select + Add question for each question, and link it to a criterion.
  5. Select Save kit.

To use a kit, attach it to a hiring step in the job's Setup › Tests and interviews, or choose it when you schedule an interview.

Writing a Scorecard

After an interview, each interviewer writes a scorecard:

  1. Go to My schedule and find the interview (it also appears on Home under Scorecards to write).
  2. Select Feedback. The Interview feedback panel shows the kit's questions and scoring guide.
  3. Score each criterion from 1 to 5.
  4. Choose an Overall score (or Average of the rubric) and a Recommendation, from Strong yes to Strong no.
  5. Add your Notes and select Submit feedback.

In Shuma's built-in video room, you can also fill in the scorecard during the call under Kit & scorecard, then select Save scorecard.

Submitted scorecards appear on the job's Interviews tab under Scorecards. Admins can set Shuma to remind interviewers who haven't handed in their scorecard, under Settings › Interviews › Remind the panel about scorecards.

Optional feature: AI help with reviews and scorecards

If your organisation has the AI assistant switched on, your admin can choose which AI helpers to use in Settings › AI assistant. For example:

  • Summarise ... with AI gives an AI summary of a recorded or typed answer. Any suggested score stays hidden until you've given your own.
  • Draft my scorecard with AI drafts a scorecard from what was said in an interview held in the built-in video room. Nothing is filled in until you select Use draft, and you check and decide every score before you save.

AI only assists. It never makes a decision, and a person in your team decides every score and every outcome.


Assessments

Assessments are skills tests and questionnaires that candidates complete from their personal link.

Creating an Assessment

  1. Go to Library › Assessments and select New Assessment.
  2. Choose the type, for example Skills Test or Questionnaire, and add a description and a welcome message.
  3. Optionally set a Time Limit (minutes).
  4. Select + Add Question for each question. Choose the answer type (Text, Single Choice or Multiple Choice) and, for scored questions, the Points.
  5. Optionally set a Pass mark (%), worked out from the automatically marked (choice) questions.
  6. Select Create Assessment.

Automatic rejection

If you set a pass mark, you can also tick Reject anyone who scores below the pass mark. Candidates rejected this way are told the decision was automatic and can ask for a person to review it. Those requests appear in Settings › Privacy requests.

Sending an Assessment

  • Automatically: attach it to a hiring step as a Skills test candidate action (see What Happens at Each Step).
  • To one candidate: open their record and select Assessment.

Results appear on the candidate's Assessments tab and on the job's Reviews tab.

Optional feature: one-way video interviews

If your organisation has One-way video interviews switched on, you can create video interviews in Library › Assessments. Candidates record their answers in their own time, and your team watches and scores them from the job's Reviews tab under Review recorded answers.